Loading ...
Loading ...
Loading ...
Additional printer setup
Installing internal options
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer o, and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them o as well, and unplug any cables going into the printer.
Available internal options
• Memory card
– DDR2 DIMM
– Flash memory
• Fonts
• Firmware cards
– Forms and Bar Code
– PRESCRIBE
– IPDS
• Printer hard disk
• Lexmark
TM
Internal Solutions Ports (ISP)
– Standard 10/100/1000 Ethernet
– MarkNet
TM
N8350 802.11 b/g/n wireless print server
– MarkNet N8352 802.11 b/g/n wireless print server
Accessing the controller board
Note: Use the screwdriver located inside the bottom front door of the printer.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware
or memory devices sometime after setting up the printer, then turn the printer
o,
and unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer,
then turn them o as well, and unplug any cables going into the printer.
Additional printer setup 21
Loading ...
Loading ...
Loading ...