Loading ...
Loading ...
Loading ...
High-voltage battery
81
Charging cable
Self-check
When the char
ging cable is plugged into
the electrical socket, the protective device au-
tomatically performs a self-test. During this
check, all warning and indicator lamps turn on
briefly and go out one after the other. Upon
completion, the operational status at that time
is displayed.
Operating displays
One or more control lamps ›››Fig.62
1
,
2
o
3
light up green.
Display ›››Fig.62
Meaning
1
ignition The charging cable is
plugged int
o the mains
1
,
2
on,
3
flashes sl
owly
›››page81
The high-voltage battery
is charging.
1
2
and
3
on The charging process is
compl
ete. The high-volt-
age battery has charged.
Set the charging current
The charging cable limits the charging current
according to the available power supply.
If the local mains supply does not allow charg-
ing at the maximum charging current, the
charging current can be reduced, depending
on the charging setting features in the infotain-
ment system ›››page77.
Temperature control
The charging cable temperature control
switches on when the charging cable over-
heats, such as when it has been stored in a lug-
gage compartment exposed to high tempera-
tures or strong sunlight.
Display ›››Fig.62
Meaning
1
,
4
flashing The housing connector
has o
verheated.
2
,
4
flashing The protection device has
o
verheated.
If the charging process continues with a lower
current, both the operating indicator and the
warning lamp ›››Fig.62
4
flash r
ed.
●
Unplug the charging cable from the mains
and wait for it to cool down.
●
If it disconnects again, or the charging cur-
rent reduces and the cause does not seem to
be exposure to an external heat source, make
sure that the green control lamp is flashing
›››Fig.62. To check the charging cable, please
visit a SEAT dealer. Get an establishment that
specialises in electrical installations to check
the infrastructure connection.
Fault display
If the red warning light
4
flashes or t
urns on
without one of the indicator lamps ›››Fig.62
1
,
2
o
3
also turning on continuously on the
st
atus indicator, there is a fault.
Display ›››Fig.62
Meaning
1
flashing,
4
on or
flashing
Failure in the power sup-
ply.
2
flashing,
4
on or
flashing
Failure in the protection
de
vice.
3
flashing,
4
on or
flashing
Failure in the vehicle.
The charging process pauses or is cancelled.
●
Check the instructions located on the back of
the pr
otective devices.
●
Seek professional assistance if the fault per-
sists.
Note
If there is any other mains connection dur-
ing the char
ging process, or if the vehicle is
right next to the high voltage cables, charg-
ing from an electrical socket is not possible
in some cases. Additional mains connections:
●
Connecting a 12 volt battery charger.
●
Contact with a work tool connect to the
mains, such as a vehicle lift.
Loading ...
Loading ...
Loading ...