Loading ...
Loading ...
Loading ...
Driver information
23
Instrument panel
1)
Valid for the basic digital instrument cluster.
When the Infotainment system is on and there is
no r
oute guidance active, the graphic represen-
tation of a compass is also shown.
Low consumption driving
Depending on the equipment, when driving, the
display appears on the instrument panel
when the v
ehicle is in low consumption status
due to active cylinder management (ACT®)
›››page145.
Radiator fan operation indication
1)
This indication is displayed after switching o
the ignition when the radiator fan is still running.
The operating time of the radiator fan can de-
pend on:
●
Exhaust gas treatment, e.g. during regenera-
tion of the particul
ate filter.
●
Active brake cooling after descending a
slope.
●
Dissipation of heat from the engine after high
stress, e.g. after a very long drive.
Destination information
1)
If route guidance is enabled, the expected
travel time and the distance to the destination
are displayed.
Navigation indications
1)
If route guidance is activated, the direction of
travel is shown by arrows.
WARNING
Even when the outside temperature is higher
than fr
eezing temperature, some roads and
bridges could be frozen.
●
The “ice crystal symbol” indicates that
there may be a risk of freezing.
●
At outside temperatures above +4°C
(+39°F), there may be ice even when the “ice
crystal symbol” is not on.
●
The outside temperature sensor takes a
guideline measurement.
Note
●
There are dierent instrument panels and
therefore the versions and instructions on
the display may vary. In the case of dis-
plays without warning or information texts,
faults are indicated exclusively by the con-
trol warning lamps.
●
Some settings can be saved in the user ac-
counts of the personalization function and
can therefore be changed automatically
when switching user accounts ›››page242.
●
Some indications on the instrument panel
scr
een may be concealed by a sudden
event, e.g. an incoming call.
●
Depending on the equipment, some set-
tings and instructions can be carried out
or displayed on the infotainment system as
well.
●
If there are several warnings at the same
time, the symbols will be displayed one after
the other for a few seconds. The symbols will
stay on until you remove the cause.
●
If when switching on the ignition warnings
are shown about existing faults, it might not
be possible to change the settings or show
the information as described. In this case, go
to a specialised workshop and request a re-
pair.
Driving data indicator
The driving data display shows a range of driv-
ing data and consumption values.
Change from one display to another
●
Turn the right thumbwheel of the multifunc-
tion steering wheel ›››page32.
Loading ...
Loading ...
Loading ...