Loading ...
Loading ...
Loading ...
114
Seats and head restraints
Removing the headrests from the second
r
ow of seats
●
If necessary, adjust the backrest of the seat
so the head restraint can be removed.
●
Push the head restraint up as far as it will go
›››
in Intr
oduction on page112.
●
Remove the head restraint completely while
pressing button ›››Fig.97
1
.
Inst
alling the headrests of the second row of
seats
●
Unlock the rear seat backrest and fold it for-
ward slightly ›››page110.
●
Place the head restraint in the correct posi-
tion on the guides of the corresponding back-
rest and insert it.
●
Lower the head restraint while pressing but-
ton
1
.
●
Raise the rear seat backrest and lock it.
WARNING
Remove the rear headrests only when it is
necessary t
o fit a child seat. After removing a
child seat, refit the headrest immediately.
Note
The headrests of the third row of seats can-
not be r
emoved.
Seat functions
Memory function
Fig.98 On the out
er side of the driver seat:
memory buttons.
Memory buttons
Individual settings f
or the corresponding seat
can be stored with the memory buttons. Addi-
tionally, settings for the exterior mirrors can be
saved with the memory buttons of the driver
seat.
The settings will also be saved in the key or in
the user of the online services, depending on
the version.
Save the settings of the driver seat and the
exterior mirrors while driving forward
●
Apply the electronic parking brake.
●
Move the gearshift to the neutral position.
●
Switch the ignition on.
●
Adjust the driver seat and the exterior mirrors.
●
Press
for longer than 1 second ›››Fig.98.
●
Press the memory button in which to store the
settings within appr
ox. 10 seconds. A warning
sound will confirm they have been stored.
Storing the passenger rear view mirror set-
tings while driving in reverse
●
Apply the electronic parking brake.
●
Move the gearshift to the neutral position.
●
Switch the ignition on.
●
Press the required memory button.
●
Select reverse gear.
●
Adjust the front passenger exterior mirror so
that you can see, for example, the kerb edge
well.
●
The new position of the mirror will be stored
automatically and allocated to the vehicle key
that was used to unlock the vehicle.
Activating settings
●
With the vehicle stopped and the ignition
switched on, press and hold the correspond-
ing memory button until the saved position is
reached.
●
OR: With the ignition switched o and the
driver's door open, briefly press the corre-
sponding button.
The front passenger side exterior mirror auto-
matically changes from the position stored for
reversing as soon as the vehicle moves forward
Loading ...
Loading ...
Loading ...