Loading ...
Loading ...
Loading ...
74
High-voltage battery
●
Charging cable for domestic power sock-
ets: The pr
otection device performs a self-test
›››page80.
●
With the vehicle unlocked, the battery charg-
ing cover opens when it is pressed ›››Fig.55.
●
Plug the charging connector into the charg-
ing socket. Check that the charging connector
is fully plugged in.
The connector locks automatically.
The LED (charging process display) on the
charging socket lights up
1
. The indicator
l
amp
lights up on the instrument cluster
scr
een.
You can set the charging as required in the info-
tainment system ›››page77.
Automatic start of the charging process
If programmed charging is not activated,
the charging process starts immediately
›››page77. The external charging infrastruc-
ture must be active.
During the charging
The indicator lamp
flashes gr
een on the in-
strument cluster.
The charging process indicator on the charging
socket flashes green
1
. The charging connec-
t
or is locked.
If the charging process indicator lights up red,
there is a fault ›››page74.
Interrupt the charging process
The char
ging process can be interrupted:
●
Unlock the vehicle.
●
Press the immediate charge button
›››Fig.59
1
. The charging connector remains
l
ocked.
●
Unlock the vehicle to unlock the charging
connector. The charging process can continue
by pressing the immediate charge button again
.
T
o restart the charging process just press the
function button to start the charging process.
After charging
When the high-voltage battery is fully charged,
the charging process display on the charging
socket lights up green.
●
Unlock the vehicle.
●
Unplug the charging connector from the
charging socket within 30 seconds.
●
Disconnect the charging cable from the
power supply and replace the protective cap.
●
Close the charging cover and make sure you
hear it click into place.
First charge and charging after a long time
If the high-voltage battery is new or has
not been charged for a long time, the maxi-
mum charge level of the battery can only be
reached after several charging processes. This
is for technical reasons and is not a vehicle
malfunction.
If the vehicle is not used for a long period of
time, the high-voltage battery must be charged
at least once every four months.
Note
If you leave the charging cable connected
aft
er charging, the vehicle's electrical con-
sumers will not drain the high-voltage bat-
tery.
Charging process display
Valid for: hybrid vehicles
Fig.56 Behind the batt
ery charging socket
cover: charging process indicator.
Loading ...
Loading ...
Loading ...