Loading ...
Loading ...
Loading ...
24
Driver information
1)
This will show all data on the display at the same time: distance travelled, average consumption, average speed and autonomy.
2)
Valid for the SEAT Digital Cockpit.
3)
Not available in all countries.
–
–
–
–
–
–
–
–
–
–
–
–
–
Changing memory
●
While in Driving data > General in-
formation pr
ess
on the multi-function
st
eering wheel to switch between the 3 memo-
ries
1)
:
Since start: The memory is del
eted if
the journey is interrupted for more than 2
hours.
Since refuel: Display and storage of
the journey data and the consumption val-
ues collected. When refuelling, the memory
is deleted.
Long-term: This memory contains travel
data up to a maximum of 19hours and
59 minutes or 99 hours and 59 minutes, or
up to a maximum of 1999.9 km or 9999.9
km. When one of these values is exceeded
(varies depending on the version of the in-
strument panel), the memory is deleted.
Delete journey data presets
●
Select the memory that you wish to erase.
●
Keep the
button on the multi-function
st
eering wheel pressed for approximately 2
seconds.
Select the instructions
In the Inf
otainment system, in the menu Vehicle
settings, you can display dierent travel data
›››page37.
Current consumption: The current fuel
consumption display operates throughout
the journey, in litres/100 km; and with the
engine running and the vehicle stopped, in
litres/hour.
Average consumption: The average
fuel consumption is displayed after driving
for approximately 300 metres.
Travelling time: This indicates the
hours (h) and minutes (min) since the igni-
tion was switched on.
Range:
2)
Approximate distance in km that
can still be travelled if the same driving
style is maintained.
AdBlue range or
: Appr
oximate dis-
tance in km that can still be travelled with
the current level of the AdBlue® tank with
the same driving style. The indication ap-
pears from a range of less than 2400 km
and cannot be deactivated.
3)
Distance travelled: Distance covered
in km (m) after switching on the ignition.
Average speed: The av
erage speed will
be shown after driving for approximately
100 metres.
Digital speed: Current speed dis-
played in digital format.
Eco tips: Recommendations messages
are shown to reduce consumption through
good driving practices, e.g. Air condi-
tioning on: close the window.
Boost/Torque: Indicates the power and
torque of the combustion engine (does not
indicate electric mode).
Setting a speed warning
●
Select the display Warning at ---km/h or
W
arning at ---mph.
●
Press the
button on the multi-function
st
eering wheel to memorise the current speed
and activate the warning.
●
Activate: set the desired speed within 5 sec-
onds by rotating the wheel on the multi-func-
tion steering wheel. Next, press the
button
again or w
ait for a few seconds. The speed is
stored and the warning activated.
●
Deactivate: press the
button. The stored
speed is del
eted. The warning can be set for
speeds of between 30 and 250km/h (18 and
155mph).
Loading ...
Loading ...
Loading ...