Loading ...
Loading ...
Loading ...
Safety
57
Transporting children safely
1)
Compliance with current national legislation and the manufacturer's instructions is required when using or installing child seats.
ing. Child seats with semi-universal approval
include a list of v
ehicle models for which they
can be installed.
●
Vehicle-specific: vehicle-specific approval
requires a dynamic test of the child seat for
each vehicle model separately. Child seats
with vehicle-specific approval also include a list
of vehicle models for which they can be instal-
led.
●
i-Size: child seats with i-Size approval must
meet the requirements prescribed in the ECE-
R 129 standard in relation to installation and
safety. Child seat manufacturers can tell you
which seats have i-Size approval for this vehi-
cle.
Fitting and using child seats
Fig.39 Airbag stick
er: on the passenger side
sunshade blind.
Fig.40 Airbag stick
er: on the rear frame of the
passenger side door.
Warnings about fitting a chil
d seat
Take the following general warnings into ac-
count if you are going to fit a child seat. They
are valid for all child seats regardless of their
attachment system.
●
Please read and follow the child seat manu-
facturer's operating instructions.
●
The child seat should preferably be fitted to
the rear seat behind the front passenger seat
so that the child can exit the vehicle on the
pavement side.
●
Set the height of the seat belt such that it
adapts to the child seat naturally, without twist-
ing. The lowest position of the seat belt height
regulator must be used with rear-facing child
seats.
●
To correctly use a child seat in the back, the
front backrest must be adjusted so that there
is no contact with the child seat in the back in
the case that it goes opposite to the direction
of the car. In the case of front facing restraint
systems, the front backrest must be adjusted so
that there is no contact with the child's feet.
●
For a correct assembly of the child's seat on
the rear seats, adjust or dismount the headrest,
in order to prevent contact with the seat.
●
If a semi-universal type chair is to be installed,
in which the method of attachment to the car
is through the seat belt and support bracket,
it should never be installed in the central rear
seat as the ground clearance is lower than in
other places and the support bracket will not
allow the seat to remain suciently stable.
●
When fitting a child seat on the front passen-
ger seat, the seat must be moved backwards
as far as possible and placed in the highest
position. The backrest must also be put in a
vertical position
1)
.
Important information about the front pas-
senger front airbag
A sticker with important information about the
passenger airbag is located on the passenger's
sunshade blind and/or on the passenger side
door frame ›››Fig.39.
Read and always observe the safety informa-
tion included in the following chapters:
Loading ...
Loading ...
Loading ...