Loading ...
Loading ...
Loading ...
Embroidering
84
■ Removing the embroidery frame
a
Raise the presser foot lever to raise the presser foot.
b
While pushing the lever of the embroidery frame
holder to the left, slightly lift the back and then the
front of the embroidery frame up to clear the pins and
then remove.
Hold the lever lightly to the left.
1 Lever
Remove the back mounting bracket from the pin.
1 Back mounting bracket
2 Back pin
Remove the front mounting bracket from the pin.
1 Front mounting bracket
2 Front pin
■ Copyright information
The patterns stored in the machine are intended for private
use only. Any public or commercial use of copyrighted
patterns is an infringement of copyright law and is strictly
prohibited.
■ Embroidery pattern types
1 Embroidery patterns
2 Brother “Exclusives”
3 Floral alphabet patterns
4 Character patterns
5 Frame patterns
6 Touch this key to position the embroidery unit for
storage.
7 Patterns saved in the machine's memory, patterns saved
in USB flash drive, or patterns transferred via wireless
network (page 100)
• Refer to the “Embroidery Design Guide” for more
information on each category’s embroidery pattern.
Selecting an embroidery pattern
a
Touch in the pattern type selection screen, and
then touch .
• If the pattern type selection screen is not displayed,
touch to display the screen below.
b
Touch or to display the desired pattern on the
screen.
CAUTION
• Do not hit the needle with your finger or the
embroidery frame. It may cause injury or
needle breakage.
a
a
b
a
b
Embroidering
c
f
e
gd
a
b
Loading ...
Loading ...
Loading ...