Loading ...
Loading ...
Loading ...
Replacing the Presser Foot
30
Replacing the presser foot
a
Press (Needle position button) once or twice to
raise the needle.
b
Touch .
The screen changes, and all keys and operation
buttons are locked (except ).
c
Raise the presser foot lever.
d
Press the black button at the back of the presser foot
holder in order to remove the presser foot.
e
Place the appropriate presser foot below the presser
foot holder so that the presser foot pin is aligned with
the notch in the holder.
f
Slowly lower the presser foot lever so that the presser
foot pin snaps into the notch in the presser foot holder.
1 Presser foot lever
2 Presser foot holder
3 Notch
4 Pin
The presser foot is attached.
g
Raise the presser foot lever to check that the presser
foot is securely attached.
h
Touch to unlock all keys and buttons.
Replacing the Presser Foot
CAUTION
• Use the appropriate presser foot for the type
of stitch that you wish to sew, otherwise the
needle may hit the presser foot. The needle
may break, possibly resulting in injury. For
details on the presser foot that should be used
with the selected stitch, refer to “Stitch Chart”
on page 45.
IMPORTANT
• Use presser feet designed specifically for this
machine.
Note
• When a stitch is selected, the icon for the presser
foot that should be used appears in the screen.
Check that the correct presser foot is attached
before starting to sew. If the wrong presser foot is
installed, attach the appropriate presser foot.
(page 14)
CAUTION
• When replacing the presser foot, be sure that
you have touched on the operation panel
to lock all keys and buttons, otherwise injuries
may occur if the “Start/Stop” button or any
other button is pressed and the machine starts.
1 Black button
2 Presser foot holder
1 Presser foot holder
2 Notch
3 Pin
4 Presser foot type
a
b
J
1
4
2
3
a
b
c
d
Loading ...
Loading ...
Loading ...