Loading ...
Loading ...
Loading ...
Utility Stitches
70
d
Lower the needle into the fabric at the beginning of the
stitching, and then start sewing.
Lower the needle at the upper-right corner.
The fabric is fed toward the back of the machine, as
usual.
e
After you have sewn to the corner, stop the machine,
and then select stitch .
f
Start sewing.
The fabric is fed to the right.
g
After you have sewn to the corner, stop the machine,
and then select stitch .
h
Start sewing.
The fabric is fed forward.
i
After you have sewn to the corner, stop the machine,
and then select stitch .
j
Start sewing.
The fabric is fed to the left.
k
After you have sewn to the corner, stop the machine,
and then select stitch again.
l
Sew 3-5 stitches over the original starting stitches and
then stop.
■ Using the twin needle
With the twin needle, you can sew two parallel lines of
the same stitch with two different threads. Both upper
threads should have the same thickness and quality.
a
Touch and install the twin needle.
• For details on installing a needle, refer to “Replacing
the Needle” on page 29.
b
Pass the first upper thread behind the needle bar
thread guide.
• For details, refer to steps a through i of
“Threading the upper thread” on page 25.
c
Manually thread the left needle with the first upper
thread.
Pass the thread through the eye of the needle from the
front.
d
Insert the horizontal spool pin onto the bobbin winder
shaft.
Insert the spool pin so that it is perpendicular to the
bobbin winder shaft.
e
Swing the spool pin toward the left so that it is
horizontal.
Memo
• The feeding direction of the fabric differs
depending on the stitch that is selected. Be sure to
guide the fabric while machine is sewing.
IMPORTANT
• Only use the twin needle (2/11 needle), and
never use the needle threader with the twin
needle. Otherwise, the needle may break or
the machine may be damaged.
1 Bobbin winder
shaft
1
Loading ...
Loading ...
Loading ...