Loading ...
Loading ...
Loading ...
Embroidering Preparation
82
e
Gently remove the fabric from the frame without
loosening the adjustment screw.
f
Press the inner frame in from the top of the fabric
again, lining up on the inner frame and on
outer frame.
• Press the inner frame into the outer frame. Before
beginning to embroider, make sure that the top edges
of the inner and outer frames are aligned.
g
Tighten the adjustment screw while removing any slack
in the fabric by hand. The goal is to have a drum-like
sound when the fabric is struck lightly.
■ Using the embroidery sheet
When you want to embroider the pattern in a particular
place, use the embroidery sheet with the frame.
a
With a chalk pencil, mark the area of the fabric you
want to embroider.
b
Place the embroidery sheet on the inner frame.
c
Line the mark on the fabric up with the base line on the
embroidery sheet.
d
Place the inner frame with the fabric on the outer
frame and adjust the fabric if needed to align marks on
fabric with the embroidery sheet.
• For details, refer to page 81.
e
Remove the embroidery sheet.
Attaching the embroidery frame
a
Raise the presser foot lever to raise the presser foot.
b
While lightly holding the lever on the frame holder to
the left, align the two pins on the embroidery frame
holder with the mounting brackets on the frame, and
then press the frame into the embroidery frame holder
until a click is heard.
Hold the lever lightly to the left.
1 Lever
Memo
• This precautionary step will help reduce pattern
distortion while embroidering.
Memo
• You can use the included screwdriver when you
loosen or tighten the frame adjustment screw.
Note
• Wind and insert the bobbin before attaching the
embroidery frame making sure to use the
recommended bobbin thread. Check that there is
enough thread in the bobbin.
a
Loading ...
Loading ...
Loading ...