Loading ...
Loading ...
Loading ...
Stitch Chart
45
VARIOUS STITCHES
3
■ Utility stitches
Applications, stitch lengths and widths and whether the
twin needle can be used, are listed for utility stitches in the
following table.
*1
Twin needle can be used by attaching zigzag foot “J”.
Chapter 3
VARIOUS STITCHES
Stitch Chart
Memo
• When any of the following stitches (reverse stitch
patterns and reinforcement stitch patterns) are
selected, pressing (Reverse stitch button) will
sew reverse stitches.
When any other stitch is selected, pressing
(Reverse stitch button) will sew reinforcement
stitches.
• The stitch pattern symbols indicate the following.
No. 1-01 1-02 1-03 1-04
Stitch
No. 1-09 1-10 1-11 1-12
Stitch
No. 1-13 1-14 1-29 1-30
Stitch
No. 1-31 1-33
Stitch
1 Left needle position
2 Middle (center) needle position
3 Right needle position
4 Reverse stitch pattern
5 Reinforcement stitch pattern
a
b
c
d
d
e
e
Stitch
(Presser
foot)
No.
Stitch name/
Applications
Stitch
width
(mm (inch))
Auto.
Manual
Stitch
length
(mm (inch))
Auto.
Manual
(J)
1-01
Straight stitch (Left)
*1
General sewing, gather,
pintuck, etc.
0.0 (0)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.2 - 5.0
(1/64 - 3/16)
(J)
1-02
Straight stitch (Left)
*1
General sewing, gather,
pintuck, etc.
0.0 (0)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.2 - 5.0
(1/64 - 3/16)
(J)
1-03
Straight stitch
(Middle)
*1
General sewing, gather,
pintuck, etc.
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.2 - 5.0
(1/64 - 3/16)
(J)
1-04
Straight stitch
(Middle)
*1
General sewing, gather,
pintuck, etc.
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.2 - 5.0
(1/64 - 3/16)
(J)
1-05
Triple stretch stitch
*1
General sewing for
reinforcement and
decorative topstitching
0.0 (0)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 5.0
(1/64 - 3/16)
(J)
1-06
Stem stitch
*1
Reinforced stitching,
sewing and decorative
applications
1.0 (1/16)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 5.0
(1/64 - 3/16)
(N)
1-07
Decorative stitch
*1
Decorative stitching, top
stitching
0.0 (0)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 5.0
(1/64 - 3/16)
(J)
1-08
Basting stitch
For basting.
If the basting threads fall
out of the fabric, pull up
the bobbin thread before
sewing, and then pull
the upper thread and
bobbin thread under the
presser foot toward the
back of the machine
(page 27). Hold the
upper thread and
bobbin thread when
beginning to sew, and
when finished sewing,
cut the threads leaving
an excess amount of
thread.
Finally, hold the upper
thread and bobbin
thread at the beginning
of the stitching while
arranging the fabric.
0.0 (0)
0.0 - 7.0
(0 - 1/4)
20 (3/4)
5 - 30
(3/16 - 1-3/
16)
(J)
1-09
Zigzag stitch
*1
For overcasting,
mending.
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
1.4 (1/16)
0.0 - 5.0
(0 - 3/16)
(J)
1-10
Zigzag stitch
*1
For overcasting,
mending.
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
1.4 (1/16)
0.0 - 5.0
(0 - 3/16)
Loading ...
Loading ...
Loading ...