Loading ...
Loading ...
Loading ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
50
Parameter Description
be entered.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
Click the Back button to return to the previous window.
After clicking the Configure button, the following page will appear.
Figure 4-32 DHCP Server Pool Settings (Configure) Window
The fields that can be configured are described below:
Parameter Description
Boot File
Enter the boot file’s name here. This name can be up to 64 characters long.
Domain Name
Enter the domain name for the DHCP client here. This name can be up to 64
characters long.
Network (IP/Mask)
Enter the network IPv4 address and subnet mask for the DHCP client here.
Next Server
Enter the next server’s IPv4 address here. This parameter is used to specify the
server IP address for the client to boot the image. The server is typically a TFTP
server. Only one boot server can be specified.
Default Router
Enter the IPv4 address of the default router for the DHCP client here. Up to 8 IPv4
address can be entered here. The IP address of the router should be on the same
subnet as the client’s subnet. Routers are listed in the order of preference. If
default routers are already configured, the default routers configured later will be
added to the default interface list.
DNS Server
Enter the IPv4 address to be used by the DHCP client as the DNS server here.
Up to 8 IPv4 address can be entered here. Servers are listed in the order of
preference. If DNS servers are already configured, the DNS servers configured
later will be added to the DNS server list.
Netbios Name Server
Enter the WINS name server’s IPv4 address for the DHCP client here. Up to 8
IPv4 address can be entered here. Servers are listed in the order of preference. If
name servers are already configured, the name server configured later will be
added to the default interface list.
Netbios Node Type
Select the NetBIOS node type for Microsoft DHCP clients here. Options to choose
from are Broadcast, Peer To Peer, Mixed, and Hybrid. The node type of the h-
node (Hybrid) is recommended. The node type determines the method NetBIOS
use to register and resolve names. The broadcast system uses broadcasts. A p-
node system uses only point-to-point name queries to a name server (WINS). An
Loading ...
Loading ...
Loading ...