Loading ...
Loading ...
Loading ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
334
Figure 9-58 IPv6 RA Guard Window
The fields that can be configured are described below:
Parameter Description
Policy Name
Enter the policy name here. This name can be up to 32 characters long.
Device Role
Select the device role here. Options to choose from are Host and Router. By
default, the device's role is Host, which will block all the RA packets. If the
device's role is Router, RA packets will be forwarded according to the port's
bound ACL.
Match IPv6 Access List
Enter or select the IPv6 access list to match here. Click the Please Select button
to select an existing ACL from the list.
Target Port
Tick this option to specify the target port.
Unit
Select the Switch unit that will be used for this configuration here.
From Port ~ To Port
Select the appropriate port range used for the configuration here.
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specified entry.
After clicking the Please Select button, the following window will appear:
Figure 9-59 IPv6 RA Guard (Please Select) Window
Select the radio button next to the entry to use that ACL in the configuration.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the OK button to accept the selection made.
IPv6 DHCP Guard
This window is used to display and configure the IPv6 DHCP guard settings.
To view the following window, click Security > IMPB > IPv6 > IPv6 DHCP Guard, as shown below:
Loading ...
Loading ...
Loading ...