Loading ...
Loading ...
Loading ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
103
Multicast Static FDB
This window is used to display and configure the multicast static FDB settings.
To view the following window, click L2 Features > FDB > Static FDB > Multicast Static FDB, as shown below:
Figure 5-2 Multicast Static FDB Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the stacking unit ID of the Switch that will be configured here.
From Port ~ To Port
Select the range of ports that will be used for this configuration here.
VID
Enter the VLAN ID of the VLAN the corresponding MAC address belongs to.
MAC Address
Enter the static destination MAC address of the multicast packets. This must be a
multicast MAC address. The format of the destination MAC address is 01-XX-XX-
XX-XX-XX.
Click the Apply button to accept the changes made.
Click the Delete All button to remove all the entries.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
MAC Address Table Settings
This window is used to display and configure the MAC address table’s global settings.
To view the following window, click L2 Features > FDB > MAC Address Table Settings, as shown below:
Figure 5-3 MAC Address Table Settings (Global Settings) Window
The fields that can be configured are described below:
Parameter Description
Aging Time
Enter the MAC address table’s aging time value here. This value must be
between 10 and 1000000 seconds. Entering 0 will disable MAC address aging. By
default, this value is 300 seconds.
Aging Destination Hit
Select to enable or disable the aging destination hit function.
Loading ...
Loading ...
Loading ...