Loading ...
Loading ...
Loading ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
251
Parameter Description
WRED State
Select to enable or disable the WRED feature state on the specified port(s) here.
Profile
Enter the WRED profile’s ID here. The range is from 1 to 128.
Weight
Enter the exponential weight value here. The range is from 0 to 15. This feature is
used to configure the WRED exponential weight factor for the average queue size
calculation for the queue.
ECN State
Select to enable or disable the ECN feature on the specified port(s) here.
Click the Apply button to accept the changes made.
WRED Drop Counter
This window is used to display and clear the WRED feature’s drop counter information.
To view the following window, click QoS > WRED > WRED Drop Counter, as shown below:
Figure 7-28 WRED Drop Counter Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch’s unit ID that will be used here.
From Port ~ To Port
Select the Switch’s port range that will be used here.
Click the Clear button to clear the counter information based on the selections made.
Click the Clear All button to clear the counter information associated with all entries.
ETS
ETS Port Settings
This window is used to display and configure the Enhanced Transmission Selection (ETS) willing mode for the Data
Center Bridging Exchange Protocol (DCBX) on the specified interface(s).
To view the following window, click QoS > ETS > ETS Port Settings, as shown below:
Loading ...
Loading ...
Loading ...