Loading ...
Loading ...
Loading ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
142
To view the following window, click L2 Features > STP > STP Instance, as shown below:
Figure 5-51 STP Instance Window
The fields that can be configured are described below:
Parameter Description
Instance Priority
After clicking the Edit button, enter the instance priority value here. This specifies
that the bridge priority and bridge MAC address together forms the Spanning-Tree
Bridge-ID, which is an important factor in the Spanning Tree topology. The range
is from 0 to 61440.
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
MSTP Port Information
This window is used to display and configure the MSTP port information settings.
To view the following window, click L2 Features > STP > MSTP Port Information, as shown below:
Figure 5-52 MSTP Port Information Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this display here.
Port
Select the port number that will be cleared here.
Cost
After clicking the Edit button, enter the cost value here. This value must be
between 1 and 200000000.
Priority
After clicking the Edit button, select the priority value here. Options to choose
from are 0 to 240. By default this option is 0. A lower value has higher priority.
Loading ...
Loading ...
Loading ...