D-Link DXS-3400 Top Of Rack 10 Gigabit Stackable Managed Switches

User Manual - Page 236

For DXS-3400.

PDF File Manual, 490 pages, Read Online | Download pdf file

DXS-3400 photo
Loading ...
Loading ...
Loading ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
226
Parameter Description
Virtual IP Address
Enter the virtual IPv4/IPv6 address here. This parameter will be either IPv4 or
IPv6 depending on the Address Family selection made in the previous step. All
routers in the same VRRP group must be configured with the same virtual router
ID and virtual address. The IP address of the virtual router can be a real address
configured on the routers or an unused address. If the virtual address is equal to
the real address of the interface, this virtual router is the IP address owner.
Advertisement Interval
Enter the time interval value between successive advertisements by the master
router here. The range is from 1 to 255 seconds. The master will constantly send
VRRP advertisements. All virtual routers in a VRRP group must use the same
timer values.
Preemption
Select to enable or disable the preemption feature here. This is used to allow a
router to take over the master role if it has a better priority than the current
master.
Priority
Enter the priority value of the virtual router here. The range is from 1 to 254. The
master of a VRRP group is elected based on the priority. The virtual router with
the highest priority becomes the master and others with lower priorities act as the
backup for the VRRP group. If there are multiple routers with the same highest
priority value, the router with the larger IP address will become the Master. The
router that is the IP address owner of the VRRP group is always the master of the
VRRP group, and has the highest priority of 255.
Critical IP Address
Enter the critical IP address here. If the critical IP is configured on one virtual
router, the virtual router cannot be activated when the critical IP address is
unreachable. One VRRP group can only track one critical IP address.
Non-owner ping
Select to enable or disable the non-owner ping feature here. This is used to
enable a non-IP address owner virtual router in the master state to response the
ICMP echo request for IPv4 addresses or the ND request for IPv6 addresses.
Shutdown
Select to enable or disable the shutdown feature here. Avoid the common mistake
of shutting down the IP address owner routers before shutting down other non-
owner routers.
Click the Back button to return to the previous window.
Click the Apply button to accept the changes made.
Loading ...
Loading ...
Loading ...