Loading ...
Loading ...
Loading ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
214
Parameter Description
Interface VLAN
Enter the VLAN interface’s ID here. The range is from 1 to 4094. Tick the All
Interface check box to configure all interfaces.
State
Select to enable or disable the IPv6 RIP feature on the VLAN interface specified.
Metric Offset
Enter the value to be added to the metric of an IPv6 RIP route received on the
configured interface here. The range is from 1 to 16. The metric refers to the hop
count. By default, when receiving an IPv6 RIP route, a metric value of 1 is added
to the route before it is inserted into the routing table. Use this option to influence
the metric of routes received on different interfaces and thus influence the
preference of the route.
Select the Default option to use the default metric offset value, which is 1.
BFD State
Select to enable or disable the BFD state.
Passive Interface
Select to enable or disable the passive interface feature here. If this option is
enabled, the router will not send RIPng packets out through the interface.
However, RIPng packets from other routers received on the interface will continue
to be processed.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
RIPng Database
This window is used to display the RIPng feature’s routing database.
To view the following window, click L3 Features > RIPng > RIPng Database, as shown below:
Figure 6-34 RIPng Database Window
The fields that can be configured are described below:
Parameter Description
IPv6 Address/Prefix Length
Enter the IPv6 address that will be used for this display here.
Click the Find button to locate a specific entry based on the information entered.
IP Multicast Routing Protocol
IPMC
IP Multicast Global Settings
This window is used to display and configure the IP Multicast (IPMC) global settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IPMC > IP Multicast Global
Settings, as shown below:
Loading ...
Loading ...
Loading ...