Loading ...
Loading ...
Loading ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
122
Parameter Description
Length
here.
IPv6 Network Prefix / Prefix
Length
Select and enter the IPv6 address and prefix length value for the subnet VLAN
here.
VID
Enter the VLAN ID for the subnet VLAN here.
Priority
Select the priority value used here. This value is between 0 and 7. A lower value
takes higher priority.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Auto Surveillance VLAN
Auto Surveillance Properties
This window is used to display and configure the auto surveillance VLAN properties.
To view the following window, click L2 Features > VLAN > Auto Surveillance VLAN > Auto Surveillance
Properties, as shown below:
Figure 5-31 Auto Surveillance Properties Window
The fields that can be configured in Global Settings are described below:
Parameter Description
Surveillance VLAN
Select to enable or disable the surveillance VLAN feature here.
Surveillance VLAN ID
Enter the VLAN ID of the surveillance VLAN here. The range is from 2 to 4094. A
normal VLAN needs to be created before assigning the VLAN as a surveillance
VLAN.
Surveillance VLAN CoS
Enter the CoS value for the surveillance VLAN here. The surveillance packets
arriving at the surveillance VLAN enabled port are marked to the CoS specified by
the command. The remarking of CoS allows the surveillance VLAN traffic to be
distinguished from data traffic in quality of service. The range is from 0 to 7.
Loading ...
Loading ...
Loading ...