D-Link DXS-3400 User Manual

Loading ...

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide

119

Parameter Description

Clone

Select this option to enable the clone feature.

From Port ~ To Port

Select the range of ports that will be used in the clone feature here.

Click the Apply button to accept the changes made.

Click the Back button to discard the changes made and return to the previous page.

When Trunk Promiscuous was selected as the VLAN Mode, the following page will appear.

Figure 5-27 VLAN Interface (Trunk Promiscuous) Window

The fields that can be configured are described below:

Parameter Description

VLAN Mode

Select the VLAN mode option here. Options to choose from are Access, Hybrid,

Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk Promiscuous, and Trunk

Secondary.

Acceptable Frame

Select the acceptable frame behavior option here. Options to choose from are

Tagged Only, Untagged Only, and Admit All.

Ingress Checking

After selecting Trunk Promiscuous as the VLAN Mode the following parameter

will be available. Select to enable or disable the ingress checking function.

Native VLAN

Tick this option to enable the native VLAN function. Also select if this VLAN

supports Untagged or Tagged frames.

VID

After ticking the Native VLAN option the following parameter will be available.

Enter the VLAN ID used for this configuration here. This value must be between 1

and 4094.

Action

Select the action that will be taken here. Options to choose from are All, Add,

Remove, Except, and Replace.

Allowed VLAN Range

Enter the allowed VLAN range information here.