DXS-3400 User Manual

Loading ...

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide

117

Parameter Description

VID

After ticking the Native VLAN option the following parameter will be available.

Enter the VLAN ID used for this configuration here. This value must be between 1

and 4094.

Action

Select the action that will be taken here. Options to choose from are All, Add,

Remove, Except, and Replace.

Allowed VLAN Range

Enter the allowed VLAN range information here.

Clone

Select this option to enable the clone feature.

From Port ~ To Port

Select the range of ports that will be used in the clone feature here.

Click the Apply button to accept the changes made.

Click the Back button to discard the changes made and return to the previous page.

When 802.1Q-Tunnel was selected as the VLAN Mode, the following page will appear.

Figure 5-24 VLAN Interface (802.1Q-Tunnel) Window

The fields that can be configured are described below:

Parameter Description

VLAN Mode

Select the VLAN mode option here. Options to choose from are Access, Hybrid,

Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk Promiscuous, and Trunk

Secondary.

Acceptable Frame

Select the acceptable frame behavior option here. Options to choose from are

Tagged Only, Untagged Only, and Admit All.

Ingress Checking

Select to enable or disable the ingress checking function.

VLAN Precedence

Select the VLAN precedence option here. Options to choose from are Mac-based

VLAN and Subnet-based VLAN.

VID

Enter the VLAN ID used for this configuration here. This value must be between 1

and 4094.

Action

Select Add to add a new entry based in the information entered.

Select Remove to remove an entry based in the information entered.

Add Mode

Select to add an Untagged parameter.