Loading ...
Loading ...
Loading ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
184
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port ~ To Port
Select the appropriate port range used for the configuration here.
Port VLAN
Select this option to enable or disable the port VLAN ID TLV to send. The Port
VLAN ID TLV is an optional fixed length TLV that allows a VLAN bridge port to
advertise the port’s VLAN identifier (PVID) that will be associated with untagged
or priority tagged frames.
Protocol VLAN
Select this option to enable or disable Port and Protocol VLAN ID (PPVID) TLV to
send, and enter the VLAN ID in PPVID TLV.
VLAN Name
Select this option to enable or disable the VLAN name TLV to send, and enter the
ID of the VLAN in the VLAN name TLV.
Protocol Identity
Select this option to enable or disable the Protocol Identity TLV to send, and the
protocol name. Options for protocol name to choose from are None, EAPOL,
LACP, GVRP, STP, and All.
Click the Apply button to accept the changes made.
LLDP Dot3 TLVs Settings
This window is used to display and configure an individual port or group of ports to exclude one or more IEEE 802.3
organizational specific TLV data type from outbound LLDP advertisements.
To view the following window, click L2 Features > LLDP > LLDP Dot3 TLVs Settings, as shown below:
Figure 5-94 LLDP Dot3 TLVs Settings Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port ~ To Port
Select the appropriate port range used for the configuration here.
MAC/PHY
Configuration/Status
Select this option to enable or disable the MAC/PHY Configuration/Status TLV to
send. The MAC/PHY Configuration/Status TLV is an optional TLV that identifies
(1) the duplex and bit-rate capability of the sending IEEE 802.3 LAN node, and (2)
the current duplex and bit-rate settings of the sending IEEE 802.3 LAN node.
Link Aggregation
Select this option to enable or disable the Link Aggregation TLV to send. The Link
Aggregation TLV indicates contains the following information. Whether the link is
capable of being aggregated, whether the link is currently in an aggregation, and
the aggregated port channel ID of the port. If the port is not aggregated, then the
ID is 0.
Loading ...
Loading ...
Loading ...