D-Link DXS-3400 User Manual

Loading ...

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide

221

Figure 6-44 Route Map (Set Clauses, Edit) Window

The fields that can be configured are described below:

Parameter Description

Action

Select Add to add a new entry based in the information entered.

Select Delete to delete an entry based in the information entered.

IP Default Next Hop

Enter the default next-hop IP addresses in the spaces provided that will be used

to route the packet. This feature can be used to specify multiple default next hop

routers. If default next hops are already configured, the default next hops

configured later will be added to the default next hop list. When the first default

next hop router specified is down, the next default next hop router specified is

tried in turn to route the packet. Up to 8 default next-hop IP addresses can be

entered.

IP Next Hop

Select the IP next hop type here. This feature is used to configure the next-hop

router to route the packet that passes the match clauses of the configured route

map sequence. Options to choose from are IP Address and Recursive.

• IP Address - Specifies the IP addresses of the next-hops to route the

packet. Enter the next-hop IP addresses in the spaces provided here. Up to

8 next-hop IP addresses can be entered.

• Recursive - Specifies the IP address of the recursive as the next-hop router.

Enter the recursive next-hop IP address in the space provided here.

IP Precedence

Select the IP precedence option here. Options to choose from are Routine,

Priority, Immediate, Flash, Flash Override, Critical, Internet, and Network.

Use this feature to set the precedence value in the IP header. This option only

takes effect when policy routing involves the IPv4 packet.

Metric

Select and enter the metric value here that will be used in the modification. The

range is from 0 to 4294967294.

Metric Type

Select the metric type here that will be used in the modification. Options to choose

from are Type-1 and Type-2.

• Type-1 - Specifies to use the OSPF external type-1 metric.

• Type-2 - Specifies to use the OSPF external type-2 metric.

Click the Apply button to accept the changes made.

Click the Back button to return to the previous window.

Loading ...

D-Link DXS-3400 Top Of Rack 10 Gigabit Stackable Managed Switches