D-Link DXS-3400 Top Of Rack 10 Gigabit Stackable Managed Switches

User Manual - Page 43

For DXS-3400.

PDF File Manual, 490 pages, Read Online | Download pdf file

DXS-3400 photo
Loading ...
Loading ...
Loading ...
DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
33
Parameter Description
sending the SNMP trap packet.
The fields that can be configured in Trap Settings are described below:
Parameter Description
Trap Global State
Select this option to enable or disable the sending of all or specific SNMP
notifications.
SNMP Authentication Trap
Tick this option to control the sending of SNMP authentication failure notifications.
An authenticationFailuretrap is generated when the device receives an SNMP
message that is not properly authenticated. The authentication method depends
on the version of SNMP being used. For SNMPv1 or SNMPv2c, authentication
failure occurs if packets are formed with an incorrect community string. For
SNMPv3, authentication failure occurs if packets are formed with an incorrect
SHA/MD5 authentication key.
Port Link Up
Tick this option to control the sending of port link up notifications. A linkup trap is
generated when the device recognizes that one of the communication links has
come up.
Port Link Down
Tick this option to control the sending of port link down notifications. A linkDown
trap is generated when the device recognizes a failure in one of the
communication links.
Coldstart
Tick this option to control the sending of SNMP coldStart notifications.
Warmstart
Tick this option to control the sending of SNMP warmStart notifications.
Click the Apply button to accept the changes made.
SNMP Linkchange Trap Settings
This window is used to display and configure the SNMP link change trap settings.
To view the following window, click Management > SNMP > SNMP Linkchange Trap Settings, as shown below:
Figure 4-8 SNMP Linkchange Trap Settings Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port ~ To Port
Select the appropriate port range used for the configuration here.
Trap Sending
Select this option to enable or disable the sending of the SNMP notification traps
Loading ...
Loading ...
Loading ...