Loading ...
Loading ...
Loading ...
Control keys
^
Press once to activate the function, press again to
deactivate the function.
i Manual operation
(Used by Miele Service Technicians)
See the Programming Manual.
FC Functions
Press this key to temporarily select another language
and/or access the Supervisor level.
A Back to the previous display
+ i Block plus
The respective program block, e.g. prewash, will be
added to the program.
m Starch Stop
Press this button to stop the program and allow
starch to be added to the laundry.
k Spin Stop
Press this button if a final spin is not required after the
final rinse.
m Delay start
Press this key to select a start time in the display.
K Information
To show program information
f Stop/Finish
Press to stop a selected program or to end an
already stopped program.
q Drain
ü Skip
Cycles of a program in progress can be skipped or
repeated.
e/- Following or previous line
S Save
See the Programming Manual.
$ Program locked
If a program is locked it cannot be stopped or ended
with the 0 "Off" button after 1 minute.
) Program unlocked
ß Dispensing
ä Dispensing not available
\ Operating data
->l<- Reset to 0 (zero)
To reset the load sensor to "00.0" when the drum is
empty and the display shows a load size.
D Data transfer
Operator Card
No programs are saved on this card. To transfer the
data from the control to the card and vice versa see
the Programming Manual.
30 programs containing 6 blocks each can be saved
on the card.
The rear side of the card can be labeled.
Guide to the washer
9
Loading ...
Loading ...
Loading ...