Loading ...
Loading ...
Loading ...
Control elements
a Display
1 Cottons 90 °C
2 Cottons universal 60 °C
3 Cottons intensive 60 °C
i FC A
After switching on the "Welcome" display will appear
for a short time followed by the program list. The most
recently used program is highlighted.
b Function buttons
The six buttons underneath the display are the
function buttons. These buttons have specific
functions depending on the status of the machine.
These functions will be listed in the display above the
buttons and will be highlighted once selected.
If the machine is reprogrammed to "Direct button
allocation" the first 6 programs listed in the display
can be selected directly via these buttons.
c START button
The lightring will flash when a selected program can
be started. Pressing the Start button will start the
program. After a program has started, pressing this
button will show the display as it was before the start
of the program.
d PC / Optical interface
This interface is used for transferring data to the
control unit from a PC and vice versa.
e Rotary selector
Turning the selector brings up options and menus in
the display.
Pressing the selector confirms your selection.
f Chip card reader
When a chip card is inserted, the programs on the
chip card can be used.
Insert the card in the direction of the arrow (on the
card).
g I Mains on switch
Switches the machine on.
h 0 Mains off switch
Switches the machine off.
i Emergency stop switch
Only for use in an emergency.
Press the red button to switch the machine off. After
the problem has been resolved, turn the red dial
clockwise to release it. Then press the Start button to
continue the interrupted program.
Description of the machine
9
a b c d e f g h i
Loading ...
Loading ...
Loading ...