Loading ...
Loading ...
Loading ...
Error messages
,
Repairs to electrical or steam operated
machines may only be carried out by a suitably
qualified person in accordance with national and
local safety regulations.
A message will appear in the display if there is a
problem either before starting a program or once it
has started:
The display remains dark.
There is no power to the machine.
^
Check the mains switch and the on-site fuses.
y
Power cut
Programme stop
Press the start button.
f
^ Once power has been restored press the START
button.
This error message can also indicate that the winding
on the motor has overheated.
^ Allow the motor to cool down.
M
Water inlet fault
Call the Service Department
if restart does not work.
if
^
Check the faucet and then press the START button.
a
Door lock fault
Call the Service Department
if restart does not work.
if
^
Push firmly on the door handle until you hear the
lock engaging. Confirm by pressing START.
§
Heating system fault
Programme stopped. Press start.
program will continue without heat.
if
^
To continue the program with heating press the
START button. If a disinfection program was
running the program will be cancelled if this
message appears.
Call the Service Department.
m
Drive motor fault
Programme stopped. Press the start button.
Motor overheating.
if
^
Allow the motor to cool down.
§
Imbalance fault
Call the Service Department
if restart does not work.
i A
The imbalance is too great and the imbalance switch
has been activated.
^ Switch the machine off and on again. Then press
the START button.
§
Drain valve fault
Call the Service Department
if restart does not work.
if
^
Check the on-site drainage system and then press
the START button.
A defective drain valve must be repaired by a Miele
Service technician only.
ö
Dispensing system fault
Fill dispenser 1
Press the start button
if
Replace the empty container with a full one.
Problem solving guide
27
Loading ...
Loading ...
Loading ...