Loading ...
Loading ...
Loading ...
Program
Operating data module
Program data -
Delete data e
\ A
After selecting Program data the following (example)
will appear in the display:
Operating data module ~ Program data
1 Hot Wash 194 °F -
2 Cottons 140 °F e
\ A
Select the program you want from the list and press
the rotary dial to call up a list of all program starts
including date and start time for that program (Hot
Wash 90°C in the example).
Program data ~ 1 Hot Wash
Date: 05.21.2010 Start time: 11:30 -
Date: 05.21.2010 Start time: 12:30 e
\ A
Select the required program start from the list for
program 1 Hot Wash and confirm your choice by
pressing the rotary dial.
Program data ~ 1 Hot Wash
Date: 05.21.2010
Name: Miller e
\ A
Other options:
Town: Lehrte
Serial number: 12345678
Machine type: PW 6107
Amount of laundry: 29 lbs
+ Button: activated
Starch stop button: activated
Without spin button: not activated
Program start: 11:30
Program end: 12:05
Total operating time:0h35min
Electrical energy: 12.5 kWh
Gas energy: 0 kWh
Stem energy: 0 kWh
Total volume of water: 140 l
Max. water temperature: 203 °F
Max. drain temperature: 113 °F
Program change 2
(after making your selection and
pressing the jog shuttle only the last 3 stops and starts will
be displayed.)
Program fault: none (only the last 3 faults are saved)
Area 1: Pre-wash (after making your selection and
pressing the jog shuttle you can display the area or the
block.)
Block 1: Pre-wash
Holding time: 6 min
Water volume: 20 l
Dispensing phase 1: Amount ml (after making your
selection and pressing the jog shuttle 5 dispensing
are displayed.)
Max. Temperature: 54 °F
Holding time: 6 min
Dispensing phase 2: no
Delete data
Operating data module
Program data
Delete data e
\ A
After selecting Delete data the following message will
appear in the display:
Operating data module ~ Delete data
Module: 02.21.2010
Total data: 07.12.2010 e
\ A
The module menu option can be used to delete the
total data and program data from the operating data
memory.
The total data option can only be used to delete the
total data from the operating data. The program data
option can only be used to delete program data from
the operating data.
After making your selection and pressing the rotary
dial you will be prompted to enter your password.
Password:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789
KSA
After keying in your password or inserting your
supervisor level key card in the reader the following
security prompt will appear in the display:
Delete operating data?
S A
After pressing the S button the data will be deleted.
Optional Module
22
Loading ...
Loading ...
Loading ...