Loading ...
Loading ...
Loading ...
Detergent dispensing
It is important to avoid adding too much detergent as
this causes excessive foam.
–
Do not use detergents which create a lot of foam.
–
Follow the detergent manufacturer's instructions for
use.
The right amount to dispense will depend on the
following:
–
The amount of laundry
–
The water hardness level
–
The soiling level of the laundry
The amount to dispense
Take the water hardness into account and follow the
detergent manufacturer's instructions on the
packaging.
Water hardness levels
Hardness
range
Water
properties
Hardness
level in
mmol/l
Hardness
in
gr/gal
I soft 0 - 1.3 0 - 7
II medium 1.3 - 2.5 7 - 14
III hard 2.5 - 3.8 14 - 21
IV very hard above 3.8 above 21
Check with your local water supplier if you do not
know the hardness level in your area.
Select a program
^
Turn the rotary dial to select a program (e.g.
Program 1 Cottons).
For this example, the following will appear in the
display:
16 Separate drain
1 Cottons 90 °C
2 Cottons universal 60 °C
i äFC A
Select the Pre-wash, Starch stop or Without spin
additional option
^
Confirm the selection of the program by pressing
the rotary selector.
For this example, the following will appear in the
display:
1 Cottons 10.0 / 10.0 kg
90 °C Main wash
Rinses 1100 rpm
+im k m A
^ If wished you can now select the Pre-wash
program block, by pressing the +i function
button.
When the +i function button is pressed, the
following will appear in the display:
1 Cottons 10.0 / 10.0 kg
40 °C Pre-wash
90 °C Main wash 1100 rpm
+i mk m A
"+i" is highlighted.
Press the function button again to deselect the
function.
Press the m Starch stop button if the laundry is to be
starched.
Press the k Without spin button if you do not want
the laundry to be spun after being rinsed.
If you do not wish to make any further alterations to
the program:
^
Press the START button. The program will start.
How to wash correctly
13
Loading ...
Loading ...
Loading ...