Loading ...
Loading ...
Loading ...
Function buttons
Pressing the button activates the function and
pressing the button again deactivates it.
f Stop/End
The function button on the right-hand side is used to
stop a program after it has started.
Pressing it again finishes the program.
+i Block plus
The relevant program block (e.g. Pre-wash) is added
to the program.
m Starch stop
Press this button if you wish to laundry to be
starched.
k Without spin
Press this button if you do not want the laundry to be
spun after being rinsed.
FC Settings
Press this button to switch to another language
temporarily.
m Start time
Press this button before the start of a program to
display the message that a start time can be
selected.
K Information
Press this button to call up program information in the
display.
q Water drainage
i Manual control
See the programming instruction booklet.
ü Change order
The order of the program in progress can be
changed or program blocks can be repeated.
A Back
Takes you back to the previous display.
e/- Indicates more information on the
next / previous line
S Save
See the programming instruction booklet.
$ Programme locked
Once a locked program has been started, the End
button can only be used to stop and cancel it during
the first minute.
) Programme unlocked
ß Dispensing
ä Dispensing switched off
\ Operating data
> I < 0- Setting (calibration)
If the display does not show 00.0 when the drum is
empty press this button to reset it.
Data transfer
Chip card operation
A chip card is available to order as an optional extra.
It is supplied without any programs.
See the programming instruction booklet for
information on transferring data from the control unit
to the chip card and vice versa.
The chip card can store a maximum of 30 programs,
each with 6 blocks. The back of the chip card can be
labelled.
Description of the machine
10
Loading ...
Loading ...
Loading ...