Loading ...
Loading ...
Loading ...
Chip cards are programmed to a machine type.
Empty cards can be used with any machine.
^
Press l "On" to turn the washer on.
The Welcome screen shows.
^ Insert the card, arrow first, into the card reader.
The display shows the list of programs on the card,
example:
Card operation
17 Fire department clothing 113 °F
18 Wrinkle-free 140 °F
i ßFC A
^
Turn the jog shuttle to select a program. Press the
jog shuttle to confirm the selection.
^
Press the "START" button to begin the program.
^
Remove the card from the card reader.
Once the program is finished it will be deleted from
the machines memory.
,
Do not insert any items other than the card into
the card reader.
If the card was inserted the wrong way, the display
shows:
§
Card fault
Reinsert card correctly in card reader.
i ü f
^
Reinsert the card properly into the card reader.
If the card is not suitable for this type of machine, the
display shows:
Card operation
Programs on the card are only
suitable for machine type PW 6167
A
^
Insert a card suitable for this machine type.
Card operation
For laundry loads which need special wash
procedures, a single special program is written on a
card which is then used to run the program.
This function blocks all machine programs. The
washer runs only the program saved on the card.
The function "Load" can be activated in the supervisor
level. The machine will only accept cards in this
function.
Chip card use
15
Loading ...
Loading ...
Loading ...