Loading ...
Loading ...
Loading ...
Possible reasons for increased levels of
foaming
–
Detergent type
^
Only use detergents formulated for commercial
washer-extractors. Domestic laundry detergents
are not suitable.
–
Using too much detergent
^
Follow the manufacturer's dosage
recommendations on the packaging and take local
water hardness levels into account.
–
Heavy foaming detergent
^
Use a low foaming detergent or contact your
detergent supplier for advice.
–
Very soft water
^
In areas with very soft water (hardness level 1)
dispense less detergent as specified by the
detergent manufacturer.
–
Soiling level of the laundry
^
For lightly soiled laundry dispense less detergent in
accordance with the detergent manufacturer's
instructions.
– Residues e.g. detergent on the laundry
^ Run a pre-wash without detergent and without
selecting a temperature.
Laundry which has been soaked before washing
must be thoroughly rinsed before running a wash
program.
– Small loads
^ Reduce the amount of detergent dispensed
according to the size of the load.
–
Drum speed too high during the wash
(Profitronic controls)
^
Reduce the drum speed and the wash rhythm.
Large articles of laundry stretching
during the spin cycle
Large articles of laundry (e.g. table cloths) can
stretch during the spin cycle. This can generally be
prevented by reprogramming the machine.
Please contact the Miele Service Department.
Service interval
If after switching the machine on the following
message appears in the display the machine will
need to be serviced by the Miele Service
Department.
§
Service interval 1
Call the Service Department
A
The display will go out after 5 minutes.
Problem solving guide
26
Loading ...
Loading ...
Loading ...