Loading ...
Loading ...
Loading ...
Cleaning and Maintenance
Cleaning
Self Clean
WARNING
Children should not be left alone or unattended in an
area where appliances are in use. During the Self
Clean cycle, parts of the appliance may become
potentially harmful to persons who lack adult
knowledge of appliances and adult reactions to
potentially harmful conditions.
During the elimination of soil during self-cleaning,
small amounts of carbon monoxide can be created.
Fiberglass insulation could give off very small
amounts of formaldehyde during the first several
cleansing cycles. To minimize exposure to these
substances, provide good ventilation with an open
window, or use a ventilation fan or hood.
During Self Clean, the oven is heated to a very high
temperature. Soil is burned off at this temperature.
NOTICE:
• Wipe out excessive spillage before self-cleaning the
oven.
• Do not clean parts or accessories in the Self Clean
oven. Remove all baking dishes and oven racks from
the oven prior to running Self Clean.
To set the Self Clean mode:
,
2.
,
,
Remove all accessories and racks from the oven.
Select the oven to be Self Cleaned (for double ovens).
If there is a cooking mode on for the selected oven,
press Oven Clear/Off to end the running mode.
Press the More Modes button.
Self Clean appears in the display. The Self Clean timer
default (3:00) hours blinks to indicate it can be
accepted or changed.
To accept the (3:00) hour default Self Clean time,
press Enter on the numeric keypad.
To enter a different number of hours or to schedule a
delayed start Self Clean, press the appropriate soft key
and follow prompts. Self Clean can be run for 2, 3 or 4-
hours. Entering a value less than 2:00 or greater than
4:00 results in an error tone and message.
Use a longer setting for a heavily soiled oven.
When the desired Self Clean time is displayed press
Enter on the numeric keypad.
,
,
The oven door locks prior to starting Self Clean.
The door lock symbol I_ is displayed and blinks while
the door is being locked. Once locked, the door lock
symbol is continuously illuminated (not blinking).
The door lock symbol remains illuminated as long as
the Self Clean mode is running.
Note: The door remains locked until the oven has
cooled down after self-cleaning. The door can be
opened again only after "Finished" appears on the
display.
When door is securely locked, the Self Clean process
begins and the oven Self Clean timer begins its
countdown.
To Cancel Self Clean
Press the Oven Clear/Off button to cancel Self Clean.
When the Self Clean timer ends, for safety the unit
must cool down before the door can unlock. During this
period the message "COOLING DOWN" is displayed.
When the cool down is complete, the message "SELF
CLEAN FINISHED" is displayed.
,
8.
Press Oven Clear/Off to clear the display when Self
Clean is finished.
After the oven has cooled down and the door is
unlocked, wipe remaining ash from the oven using a
moist cloth.
Note:
The oven light cannot be turned on during self-
cleaning.
The special heat-resistant enamel and the polished
components in the oven can become discolored over
time. This is normal and does not affect operation. Do
not use scouring pads or abrasive cleaners to treat
discolorations.
• In double oven models: Self Clean is only available for
one oven at a time. The other oven must be turned off.
English 25
Loading ...
Loading ...
Loading ...