Loading ...
Loading ...
Loading ...
,
,
Enter the start time and the end time. Press Enter to
begin Delay Cook.
If the start time set is later than the current time, the
display shows the current time with the Delay Cook
notification and the start time, mode and temperature.
Auto Probe
The probe measures the internal temperature of the food.
The probe is available for Bake, Roast and all convection
cooking modes except Convection Broil.
Remove Safety Cap before Using Probe
Some models include a temperature probe used to sense
internal tempererature of meats during cooking.
The probe ships with a black plastic safety cap over the
pointed metal end of the probe. The cap must be removed
prior to use.
6. When the Delay Cook timer starts the mode the timer
time remaining, mode and temperature are shown in
the center of the display.
At this point, Delay Cook acts exactly like an oven
timer. At the end of the timer countdown, the oven will
sound a signal and the mode will end. Press Timer Off
or open oven door to silence the alarm.
Note:
• To cancel Delay Cook, press the Oven Clear/Off
button (for double ovens, first select the upper or lower
oven).
Inserting the probe:
Insert the tip of the probe in the middle and thickest part of
the meat or the breast for poultry. Make sure the probe is
not touching fat, bone, or parts of the oven or the pan.
Note: Food must be completely thawed before inserting
the probe into the meat.
To use the probe:
,
2.
,
Insert the probe into the meat as described above.
Connect the probe to the oven. If the probe is not
connected to the oven prior to starting Probe mode, an
error tone sounds.
Press the Auto Probe button. The Set Probe and
OvenTemp screen is displayed. Use the soft keys at
the bottom of the display to select screens to enter the
desired food temperature, the oven mode to use and
the oven temperature. Use the numeric keypad to enter
the desired values. Press Enter on the numeric keypad
to confirm the settings and to start the probe mode.
English 15
Loading ...
Loading ...
Loading ...