Loading ...
Loading ...
Loading ...
4. Setthecookingmodeandtemperature.. Sabbath Mode
Note: The minimum probe temperature that can be set
is 100 ° F (40 ° C) and the maximum is 200 ° F (100 ° C).
If the probe temperature entered is outside this range,
an error is displayed.
The displayed probe temperature is updated in
increments of 5 ° during the cooking process.
When the probe temperature reaches the set
temperature, the cooking mode turns off. The current
time is displayed. An alarm tone sounds every
10 seconds for 2 minutes.
This screen remains in the display until it is cleared by
pressing the Oven Clear/Off button or until the probe
is removed. The display then goes back to standby
mode.
The probe is only available for the upper oven in double
oven units.
Note:
• Probe is not available when an Oven Timer has been
set.
• To change the probe temperature press the Probe
button. The display enters probe temperature editing
mode and displays the message "SET PROBE TEMP".
Enter the new probe temperature and press Enter to
accept the new value.
• Do not store the probe in the oven.
• Always use the handle of the probe for inserting and
removing.
• Always use a potholder to remove the probe since it
becomes hot.
• The probe is only available for the upper oven in
double oven units.
The Sabbath Mode enables those of particular faiths to use
their ovens on the Sabbath. Sabbath Mode must be
activated in the Settings menu (the default setting for
Sabbath Mode is "Yes").
The Sabbath Mode can be entered in a bake cycle only
The bake temperature must be within the Sabbath Mode
temperature range of 100° to 450 ° F. Once the Sabbath
Mode has been started the cooking temperature can be
changed (within the Sabbath Mode allowable temperature
range) by using the numeric keypad and pressing Enter to
confirm the new temperature. There is no visual or audible
response to input and there is a 30 second delay before
the new temperature is activated.
If the oven light is on during setup, it remains on throughout
the Sabbath Mode operation. If the oven light is off during
setup, it remains off throughout the Sabbath Mode
operation.
To set the Sabbath Mode:
,
No kitchen timers or oven timers may be running when
Sabbath Mode is entered. The probe must not be
inserted.
The Bake mode must be running (or in the process of
being set up to run). Press the Oven Timer soft key for
five seconds.
If a timer is running or the probe is inserted or the
temperature set is outside the acceptable Sabbath
Mode range when Sabbath Mode attempts to start, the
display blinks the message: "SABBATH NOT
AVAILABLE" for 5 seconds.
If no timers are running, the Sabbath Mode display is
shown. The oven temperature (in red) blinks to indicate
it can be changed.Use the numeric buttons to enter a
new temperature if desired. The acceptable range for
Sabbath Mode temperatures is 100 ° to 450 ° F.
English 16
Loading ...
Loading ...
Loading ...