Loading ...
Loading ...
Loading ...
574
C
The Photo Shooting Menu: Shooting Options
❚❚
Ending Focus Shift Photography
To end shooting before all shots have been taken, either:
•
select [Focus shift shooting] in the photo shooting menu, highlight
[Off], and press
J
, or
•
press the shutter-release button halfway or press the
J
button
between shots.
D
During Shooting
A
9
icon is displayed in the control panel during shooting.
D
Cautions: Focus Shift Photography
•
The shutter speed and the time needed to record the picture may vary
from shot to shot. As a result, the camera may be unable to take shots at
the selected interval.
•
Shooting ends when focus reaches infinity, and consequently depending
on the focus position at the start of shooting, shooting may end before the
selected number of shots has been taken.
•
Regardless of the option selected for Custom Setting c3 [Power off
delay]> [Standby timer], the standby timer will not expire while shooting
is in progress.
•
If you are using a flash, choose an interval longer than the time needed for
the flash to charge. If the interval is too short, the flash may fire at less than
the power needed for full exposure.
•
If shooting cannot proceed at current settings, for example because
shutter speed is set to “Bulb” or “Time”, a warning will be displayed.
•
Changing camera settings while focus shift photography is in progress may
cause shooting to end.
Loading ...
Loading ...
Loading ...