Loading ...
Loading ...
Loading ...
ge.com(U.S.)
www.GEAppliances.ca(Canada)
Possible Causes What To Do
"F--anda number You have a function error code. • Touch tile CLEAR/OFFpad. Put tile oven back into
or letter" flash ()peratiou.
in the display If the function code repeats, * Discol]l]ect ;ill power to tile range for ;it least 30
seconds and then reconnect I)OWeL If the hmction
elTOl" code l'el)eats , call fin" Sel'vice.
Controlsignals after You forgot to enter a • Touch the BAKE pad and desired temperatm'e or
entering cooking time bake temperature or the SELF CLEAN LO/STD pad and desired clean time,
or start time cleaning time,
Display goes blank A fuse in your home may • Replace the thse or reset the circuit breaker:
be blown or the circuit
breaker tripped.
The clock is in the • See the Special features of your oven control section.
black-out mode.
Displayflashes Power failure. • Reset the oh)ok,
Unable toget the Oven control pads were • The BROILHI/LOand BAKEpads must be toud/ed ;it
displayto show "SF" not touched properly, the same time and held for 3 seconds.
"Probe" appears in This is reminding you to • Enter a probe temperature.
the display enter a probe temperature
after plugging in the probe.
Power outage, Power outage or surge. • Reset the clock. If the oven was in use, yot! must reset
clock flashes it by touching the CLEAR/OFFpad,setting the clock
and resetting any cooking flmction.
Steam from the vent When using the convection • This is normal.
feature, it is normal to see
steam coming out of the oven
vent. As the number of racks
or amount of food being
cooked increases, the amount
of visible steam will increase.
"Burning" or "oily" This is normal in a new oven • To speed the process, set a self-clean cycle for a
odoremittingfrom and will disappear in time. minimum of 3 hours, See the Using tho self-cleaning
the vent oven section.
Strong odor An odor from the insulation • This is temporaI T,
around the inside of the oven
is normal for the first few times
the oven is used.
Fan noise A cooling fan or a convection • This is normal, The cooling tim will turn off and
fan (depending on the on to cool internal parts. It may run aDer the oven is
function you are using) may turned OFF, The convection tim will cycle on and off
automatically turn on mad off. until the hmction is over or the door is opened,
LOC shows in the The Range Lock-Out feature • Be sure the surfilce burner controls are turned OFE
display is activated. Turn this feature off to use the ran _e See the
Range Lock-Out section, 4l ]
Loading ...
Loading ...
Loading ...