Loading ...
Loading ...
Loading ...
Before youcall forservice..°
Troubleshooting -tips
Save time and money/. Review the charts on the following
pages first and you may not need to call for service.
Possible Causes
Burners have yellow or The combustion quality of
yellow-tipped flames bmamr flmnes needs to be
determhmd visually.
What To De
• Use the illustrations below to detemfine ifvour burner
flanles are nomml. If burner flames look like A, call for
service. Nomml burner flames should look like B or C,
depending on tile t3,l)e of gas you use. With I,P gas, some
yellow tipping on OtlteY cones is nOlillal.
ii
A-Yellow flames B-Yellow tips C-Softblue flames
Call for service onouter cones Normal for natural
Normalfor LPgas gas
Controlknobs Knob isn't pushed down. * To turn from tile OFFposition, push tile knob in and
will notturn then ttu'n.
Burners do no t light Ravage Lock-Out feature is • _Mlow tile range to cool down and touch and hold tile
activated. RANGELOCK-OUTpad (on some models) tot 3 seconds
until the disi)la_ shows LOCOFF.
Plug on rm_ge is not * Make sm'e electrical I)lug, is I)lugged,, into a lixe, properl)
completely inserted in the grounded outlet.
electrical outlet.
Gas supply not cmmected * See tile Installation Instructions that came with xom"
or tunmd on. range
A fuse h_ your home may be • Rei)lace the filse or reset the circuit breaker:
blown or the circuit breaker
tripped.
Burner parts not replaced • See tile Care and cleaningof the range section.
correctly.
Range Lock-Out or • It LOCONappears in tile display, tile range, control is
ControlLock-Outfeature locked. Turn this feature off to use the ran ,e See tile
is activated Range Lock-Out or Control Lock-Out section.
Ticking sound ofspark Control knob is still * Tm'n tile knob out of tile LifE position to tile desired
igniterpersistsafter in the LITEposition, settin,
• Tm'n tile burner off and relight. If ticking is still
present, call fi)r serxice.
Burner flames very hnproper air to gas ratio. • If range is connected to I,P gas, check all steps
large oryello W in tile Installation ]nsti uctions that came with
_O/IY Y[In re
Ovenlightdoes Light bulb is loose or defective. • Tighten or rel)lace the bulb.
not Switch operating • Call for set\ice.
light is broken.
Oven will not work Plug on range is not completely • Make sure electrical l)lug, is l)lugged,, into a lixe, properly
hlserted in the electrical outlet, grounded outlet.
A fuse h_your home may be • ]_el)lace the tilse or reset the circuit breakei:
blown or the circuit
breaker tripped.
3_ Oven controls improperly set. • See tile Using the oven section.
Loading ...
Loading ...
Loading ...