Loading ...
Loading ...
Loading ...
69
5
ERASING SHADOWS AROUND THE
EDGES OF A COPY
(Erase copy)
This feature is used to erase shadows that appear around the edges of copies of books and other thick originals.
(Edge erase)
The feature can also erase the shadow that appears down the center of books and other originals that open up.
(Center erase)
Both the shadow lines around the edges of copies and the shadow at the center can be erased. (Edge + Center erase)
• Five selections are available for the erasure width: 0", 1/4", 1/2", 3/4", 1" (0 mm, 5 mm, 10 mm, 15 mm, 20 mm).
(The default setting is 1/2" (10 mm).)
• Center erase / Edge + Center erase cannot be used in combination with dual page copy (page 62).
• Edge erase cannot be used in combination with 2 in 1 / 4 in 1 copy (page 66).
• Edge erase cannot be used when paper is fed from the bypass tray.
• Edge erase cannot be used in combination with card shot (page 71).
• Edge erase cannot be used when copying a special size original.
• Note that if the width of the erasure is too large, the edge of the image may be partially erased.
• The default setting for the erasure width can be changed. (See the "Key operator's guide".)
1
Place the original in the document
feeder tray or on the document glass.
2
Press the [SPECIAL FUNCTION] key.
The function screen appears with "SPECIAL MODES"
selected.
3
Press the [OK] key.
The special modes
screen will appear.
4
Select "ERASE" with the [ ] or [ ]
key.
The edge erase settings
screen will appear.
5
Press the [OK] key.
The edge erase settings
screen will appear.
6
Select the desired erase mode with
the [ ] or [ ] key.
"EDGE", "CENTER" or
"EDGE+CENTER" can be
selected.
A
A
A B
A B
A B
A B
Edge erase Center erase Edge + Center erase
DUPLEX
SPECIAL FUNCTION
ACC.
DUPLEX SCAN
DUPLEX SCAN
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
GHI
OK
BACK
SPECIAL MODES
MARGIN SHIFT
ERASE
DUAL PAGE COPY
[OK]:ADJUST
GH
PQR
DUPLEX
SPECIAL FUNCTION
DUPLEX SCAN
SPECIAL MODES
MARGIN SHIFT
ERASE
DUAL PAGE COPY
[OK]:ADJUST
OK
ERASE
OFF
EDGE
CENTER
1/2 inch (0~1)
Loading ...
Loading ...
Loading ...