Loading ...
Loading ...
Loading ...
LOWER THREADING
Sewing Basics
57
2
a
If the thread becomes tangled under the
bobbin winder seat, press once to
stop the bobbin winding.
b
Cut the thread with scissors near the
pretension disk.
a Pretension disk
c
Push the bobbin winder switch to the right,
and then raise the bobbin at least 100 mm
(4 inches) from the shaft.
d
Cut the thread near the bobbin and hold the
thread end of the spool with your left hand.
Unwind the thread clockwise near the
bobbin winder seat with your right hand as
shown below.
e
Wind the bobbin again.
a
Note
• Make sure that the thread passes through
the pretension disk correctly (page 53).
Loading ...
Loading ...
Loading ...