Loading ...
Loading ...
Loading ...
LCD SCREEN
30
■ Page 3
l Select whether utility stitches ( ) or quilting
stitches ( ) are displayed first in the stitch
selection screen.
m When set to “ON”, reinforcement stitches are
sewn at the beginning and/or end of sewing for a
reinforcement stitch pattern, even when the
“Reverse Stitch” button is pressed (page 79).
n You can activate this setting after connecting the
multi-function foot controller (optional). (These
settings are not operable unless the multi-function
foot controller is attached to the machine.)
(page 34)
o If this setting is set to “ON” with “End Point
Setting” set to “ON” in the stitch edit menu, the
machine will temporarily stop so the end point
sticker can be peeled off (page 93).
General Settings
■ Page 4
a Change the display language.
b Change the brightness of the needle area and
work area lights.
c If the screen is not very clear in certain
environments, you can adjust the brightness of the
screen.
d Turn both the upper and bobbin thread sensor
“ON” or “OFF”. If it is turned “OFF”, the machine
can be used without thread.
e Change the speaker volume. Increase the number
for louder volume, decrease for softer volume.
f Select the operation of the “Needle Position -
Stitch Placement” button from the following two
sequences. (page 92)
n
l
m
o
a
d
f
b
c
e
Loading ...
Loading ...
Loading ...