Loading ...
Loading ...
Loading ...
UPGRADING YOUR MACHINE’S SOFTWARE
219
Appendix
6
You can use USB media to upgrade software for your machine.
When an upgrade program is available on “ http://s.brother/cpdab/
”, please download the files following
the instructions on the website and steps below.
Upgrade Procedure Using USB
Media
a
While pressing the “Automatic Threading”
button, turn the main power to ON.
The following screen will appear on the LCD.
b
Press or .
c
Insert the USB media into the USB port
corresponding to the button pressed in step
b . USB port on the machine. The media
device should only contain the upgrade file.
a USB media
b USB port
d
Press .
The upgrade file is loaded.
e
Remove the USB media, and turn the
machine off and on again.
UPGRADING YOUR MACHINE’S SOFTWARE
Note
• Use a USB media with a capacity from 4GB to 32GB when upgrading the machine. Check that no
data other than the upgrade file is saved on the USB media being used before starting to upgrade.
Note
• The access lamp will begin blinking after
inserting USB media, and it will take about 5
to 6 seconds to recognize the media. (Time
will differ depending on the USB media).
a
b
Note
• Do not turn off your machine while the
machine is saving the update software to
itself. If the machine's power is turned off
while saving the update software, it may
result in damage to the machine.
• If an error occurs, a red text error message
will appear. When the installation is
performed successfully, following message
will appear.
Loading ...
Loading ...
Loading ...