Loading ...
Loading ...
Loading ...
LOWER THREADING
56
d
Push the spool cap onto the spool pin as far
as possible, then return the spool pin to its
original position.
e
While holding the thread with both hands,
pull the thread up from under the thread
guide plate.
a Thread guide plate
f
Pass the thread through the thread guide.
a Thread guide
g
Pass the thread around the pretension disk
making sure that the thread is under the
pretension disk.
a Thread guide
b Pretension disk
h
Follow steps g through k on page 53
through 55.
■ Using the Spool Stand
To wind thread on the bobbin while the spool stand
is installed, pass the thread from the spool through
the thread guide on the telescopic thread guide, and
then wind the bobbin according to steps
e through
k of “Using the Supplemental Spool Pin”on
page 53 to page 55.
■ Untangling Thread from Beneath the
Bobbin Winder Seat
If the bobbin winding starts when the thread is not
passed through the pretension disk correctly, the
thread may become tangled beneath the bobbin
winder seat.
Wind off the thread according to the following
procedure.
a Thread
b Bobbin winder seat
a
a
a
b
Memo
• Refer to page 25 to assemble the spool
stand.
• Refer to page 66 to thread the machine
using the spool stand.
CAUTION
• When winding thread on the bobbin, do not
cross the bobbin winding thread with the
upper thread in the thread guides.
CAUTION
• Do not remove the bobbin winder seat even if
the thread becomes tangled under the bobbin
winder seat. It may result in injuries.
Loading ...
Loading ...
Loading ...