Loading ...
Loading ...
Loading ...
STARTING AND DRIVING
}}
281
Parking brake – applying
Applying the electric parking brake
Parking brake control
1. Press firmly on the brake pedal.
2.
Push the control.
>
The
symbol in the instrument
panel flashes while the parking brake is
being applied and glows steadily when the
parking brake has been fully applied.
3. Release the brake pedal and ensure that the
vehicle is at a standstill.
4. When the vehicle is parked, the gear selector
must be in position P.
NOTE
•
In an emergency the parking brake can
be applied when the vehicle is moving by
holding in the control. Braking will be
interrupted when the accelerator pedal is
depressed or the control is released.
•
An audible signal will sound during this
procedure if the vehicle is moving at
speeds above 6 mph (10 km/h).
Related information
•
Parking brake – general information (p. 280)
•
Parking brake – releasing (p. 281)
•
Parking brake – symbols and messages
(p. 283)
•
Brakes – general (p. 277)
Parking brake – releasing
Releasing the electric parking brake
Parking brake control
Manual release
1. Fasten the seat belt.
2. Insert the remote key in the ignition slot and
press the START/STOP ENGINE button (or
press the START/STOP ENGINE button
with a valid remote key in the passenger
compartment on vehicles with the optional
keyless drive).
3. Press firmly on the brake pedal.
4. Pull the parking brake control.
Loading ...
Loading ...
Loading ...