Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
* Option/accessory.
102
Windshield wipers
Move the lever toward the steering wheel to start
the windshield and headlight washers. After the
lever is released the wipers make several extra
sweeps.
Windshield wipers and washers
Rain sensor* on/off
Thumb wheel sensitivity/frequency
CAUTION
•
Use ample washer fluid when washing
the windshield. The windshield should be
thoroughly wet when the wipers are in
operation.
•
Before using the wipers, ice and snow
should be removed from the windshield/
rear window. Be sure the wiper blades
are not frozen in place.
Windshield wipers off
Move the lever to position 0 to switch
off the windshield wipers.
Single sweep
Move the lever upward from position 0
to sweep the windshield one stroke at
a time for as long as the lever is held
up.
Intermittent wiping
With the lever in this position, you can
set the wiper interval by twisting the
thumb wheel upward to increase wiper
speed or downward to decrease the speed.
Continuous wiping
The wipers operate at normal speed.
The wipers operate at high speed.
Windshield wiper service position
The windshield wipers must be in the service
position before the wiper blades can be cleaned
or replaced. See Wiper blades – service position
(p. 351) for additional information.
Related information
•
Engine compartment – washer fluid (p. 354)
Loading ...
Loading ...
Loading ...