Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
}}
249
Deactivation
Move the gear selector from R to another gear.
The camera remains active for approx. 5 seconds
after the gear selector has been moved from R or
until the vehicle's forward speed exceeds
6 mph/10 km/h (21 mph/35 km/h in reverse).
The screen will then revert to the view that was
displayed before R was selected.
NOTE
If any button on the center console control
panel is pressed, the camera image will disap-
pear from the display. Pressing CAM will
return the camera image to the display.
Settings
By default, PAC is set to activate when the gear
selector is moved to R
To change PAC settings when a camera view is
displayed:
1.
Press OK/MENU when a camera view is on
the screen. A menu will be displayed.
2.
Turn TUNE to scroll to the desired setting.
3.
Press OK/MENU to make the setting and
exit the menu by pressing EXIT.
Summary
•
Pressing CAM will activate the camera even
if the gear selector is not in Reverse.
•
Toggle between normal view and zoom by
pressing CAM or by turning TUNE.
Related information
•
Park assist – introduction (p. 238)
•
Park assist – function (p. 238)
•
Park assist – troubleshooting (p. 246)
•
Park assist – limitations (p. 241)
•
Rear Park Assist Camera (PAC) – introduc-
tion (p. 247)
Rear Park Assist Camera (PAC) –
guiding and marker lines
Guiding lines
The lines on the screen are projected as if they
were a path on the ground behind the vehicle
and are directly affected by the way in which the
steering wheel is turned. This enables the driver
to see path the vehicle will take, even if he/she
turns the steering wheel while backing up.
NOTE
When backing up with a trailer, the trajectory
lines show the path that the vehicle will take,
not the trailer.
Trajectory lines will not be displayed while
zooming in.
Loading ...
Loading ...
Loading ...