Loading ...
Loading ...
Loading ...
LOCKS AND ALARM
171
Alarm – arming/disarming
The alarm system provides a warning if an
attempt is made to break into the vehicle.
Arming the alarm
–
Press the Lock button on the remote key.
One long flash of the turn signals will confirm
that the alarm (p. 170) is armed.
Alarm confirmation settings can be changed in
MY CAR, under
Car settings Lock settings
Keyless entry. For a description of the menu
system, see My Car – introduction (p. 79).
USA FCC ID: MAYDA 5823(3)
This device complies with part 15 of the FCC
rules. Operation is subject to the following condi-
tions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Canada IC: 4405A-DA 5823(3)
This device is subject to the following conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
Disarming the alarm
–
Press the Unlock button on the remote key.
> Two short flashes from the car's direction
indicators confirm that the alarm has been
deactivated and that all doors are
unlocked.
Related information
•
Alarm indicator (p. 170)
•
Alarm signal (p. 171)
•
Alarm – turning off (p. 172)
•
Alarm-related functions (p. 172)
Alarm signal
An audible (p. 170) signal is given by a battery
powered siren. The alarm cycle lasts for 30 sec-
onds.
The visual alarm signal is given by flashing all
turn signals for approximately 5 minutes or until
the alarm is turned off.
Related information
•
Alarm indicator (p. 170)
•
Alarm – arming/disarming (p. 171)
•
Alarm – turning off (p. 172)
Loading ...
Loading ...
Loading ...