Loading ...
Loading ...
Loading ...
DRIVER SUPPORT
}}
181
Related information
•
Cruise control (CC) – engaging and setting
speed (p. 181)
•
Cruise control (CC) – deactivating (p. 183)
Cruise control (CC) – engaging and
setting speed
Cruise control is designed to assist the driver by
maintaining a set speed. It is primarily intended
for use on long straight roads in steady traffic,
such as on highways and other main roads.
Engaging the cruise control function
Steering wheel-mounted controls and display
Standby mode
Resume set speed
Deactivating
Activate/set speed
Selected speed (gray symbol indicates
standby mode)
Cruise control active: white symbol (gray
symbol indicates standby mode)
Before a speed can be set, the cruise control
system must be engaged (put in standby mode).
–
Press the CRUISE button (1).
>
The symbol
illuminates and the text
(---) mph (5) indicates that cruise control
is in standby mode.
NOTE
Putting cruise control in standby mode does
not set a cruising speed.
Setting a speed
Use the or buttons set the vehicle's cur-
rent speed. The set speed is shown in the display.
NOTE
Cruise control cannot be engaged at speeds
below 20 mph (30 km/h).
Adjusting the set speed
After a speed has been set, it can be increased
or decreased by using the
or buttons.
1.
Press
or briefly and release the but-
ton to increase or decrease vehicle speed by
approximately 1 mph or 1 km/h.
> This will become the set speed when the
button is released.
Loading ...
Loading ...
Loading ...