Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
* Option/accessory.
125
Trip computer – Supplementary
information
General information for both Analog and Digital
trip computer functions.
Average fuel consumption
Fuel consumption since the last time this func-
tion was reset.
Average speed
The vehicle's average speed since the last time
this function was reset.
Current fuel consumption
Current fuel consumption is calculated approxi-
mately once a second. When the vehicle is mov-
ing at low speed, fuel consumption is displayed
per unit of time. At higher speeds, it is displayed
in terms of distance.
Miles or kilometers can be displayed, see the
heading "Changing units".
Distance to empty
This function shows the approximate distance
that can be driven on the fuel remaining in the
tank. When
Distance to empty shows "----",
there is very little useable fuel remaining in that
tank; refuel as soon as possible. The calculation
is based on average fuel consumption during the
last 20 miles (30 km) of driving and the amount
of fuel remaining in the tank (the accuracy of this
figure may vary if your driving style changes). An
economical driving style will generally increase
this distance.
See Economical driving (p. 291) for information
about driving economically.
Digital speed display*
Speed is expressed in the unit not used by the
instrument panel's speedometer e.g., if the nor-
mal speedometer is in mph, the trip computer will
display in the speed in km/h and vice versa.
Resetting an analog instrument panel
Trip odometer(s) and average speed
1. Display trip odometer T1 or T1, or Average
speed.
2.
Press and hold RESET until selected func-
tion is reset.
Each trip computer heading must be reset indi-
vidually.
Resetting a digital instrument panel
Trip odometer
1.
Turn the thumb wheel to select the combi-
nation of headings containing the trip odom-
eter to be reset.
2.
Press and hold RESET until selected trip
odometer is reset.
Average speed and fuel consumption
1.
Select
Trip computer reset and press OK.
2. Select one of the following alternatives using
the thumb wheel and press OK:
•
mpg
•
mph
•
Reset both
3.
Finish by pressing RESET.
Changing units
To change the unit (miles/km) used to measure
distance and speed, go to
MY CAR Settings
System options Distance and fuel units.
NOTE
In addition to changing units in the trip com-
puter, this also changes the units used in the
Volvo Navigation System (VNS)*.
Related information
•
Trip computer – introduction (p. 118)
•
Trip computer – functions, analog instrument
panel (p. 120)
•
Trip computer – functions, digital instrument
panel (p. 123)
•
Trip computer – Trip statistics (p. 126)
Loading ...
Loading ...
Loading ...